Touchscreen Alignment SYNC 2

If the touchscreen does not respond properly (presses register in the wrong spot / input seems to be on the opposite side of the screen), use the procedure below to align the touchscreen.

  1. Turn on the radio and while in AM/FM mode, press and hold the EJECT button, and within 1 second, press the SEEK UP button. 
  2. Press and hold the SEEK DOWN button to enter the touchscreen calibration.Touch and hold the touch points as they appear on the touchscreen (a stylus is not required).
  3. To accept the new settings, touch anywhere on the screen when the screen displays “New calibration settings have been measured. 
  4. Press the Enter key to accept the new settings.” 

Related Product Categories:

https://www.4dtech.com/navigation/sync2/

https://www.4dtech.com/replacement-sync-2-module-apim-myford-touch/